Intellinet 560931 Скачать руководство пользователя страница 198

Страница: 198 / 281

198

6.1.2.4 QCL Status

This page shows the QCL status of different QCL users. Each row describes the QCE that is defined. It

is a conflict if a specific QCE is not applied to the hardware due to hardware limitations. The maximum

number of QCEs is

256

on each switch.

User

Indicates the QCL user.

QCE#

Indicates the index of QCE.

Frame Type

Indicates the type of frame to look for incomming frames. Possible frame types:

Any

: The QCE will match all frame type.

Ethernet

: Only Ethernet frames (with Ether Type 0x600-0xFFFF) are allowed.

LLC

: Only (LLC) frames are allowed.

SNAP

: Only (SNAP) frames are allowed.

IPv4

: The QCE will match only IPV4 frames.

IPv6

: The QCE will match only IPV6 frames.

Port

Indicates the list of ports configured with the QCE.

Action

Indicates the classification action taken on an ingress frame if the parameters configured are matched

with the frame's content.

There are three action fields: Class, DPL and DSCP.

Class

: Classified

QoS class

; if a frame matches the QCE, it will be put in the queue.

Содержание 560931


























































































































































































































































































Результаты поиска

Содержание 560931

Отзывы:

Бренды по названию

Популярные бренды

Intellinet 560931, Руководство пользователя

Результаты поиска

Содержание 560931

Отзывы:

Бренды по названию

Популярные бренды