Intellinet 560931 Скачать руководство пользователя страница 279

Страница: 279 / 281

279

This page provides information about the active and alternate (backup) firmware images in the device,

and allows you to revert to the alternate image.

The Web page displays two tables with information about the active and alternate firmware images.

Note

1. In case the active firmware image is the alternate image, only the "Active Image" table is shown. In

this case, the Activate Alternate Image button is also disabled.

2. If the alternate image is active (due to a corruption of the primary image or by manual intervention),

uploading a new firmware image to the device will automatically use the primary image slot and
activate this.

3. The firmware version and date information may be empty for older firmware releases. This does not

constitute an error.

Image Information

Image

The flash index name of the firmware image. The name of primary (preferred) image is

image

;

the

alternate image is named

image.bk.

Version

The version of the firmware image.

Date

The date where the firmware was produced.

Buttons

Activate Alternate Image:

Click to use the alternate image. This button may be disabled depending

on system state.

Cancel:

Cancel activating the backup image. Navigates away from this page.

Содержание 560931


























































































































































































































































































Результаты поиска

Содержание 560931

Отзывы:

Бренды по названию

Популярные бренды

Intellinet 560931, Руководство пользователя

Результаты поиска

Содержание 560931

Отзывы:

Бренды по названию

Популярные бренды