Intellinet 560931 Скачать руководство пользователя страница 216

Страница: 216 / 281

216

Indicates the frame type of the ACE. Possible values:

Any

: The ACE will match any frame type.

EType

: The ACE will match Ethernet Type frames. Note that an Ethernet Type based ACE will not get

matched by IP and ARP frames.

ARP

: The ACE will match ARP/RARP frames.

IPv4

: The ACE will match all IPv4 frames.

IPv4/ICMP

: The ACE will match IPv4 frames with ICMP protocol.

IPv4/UDP

: The ACE will match IPv4 frames with UDP protocol.

IPv4/TCP

: The ACE will match IPv4 frames with TCP protocol.

IPv4/Other

: The ACE will match IPv4 frames, which are not ICMP/UDP/TCP.

IPv6

: The ACE will match all IPv6 standard frames.

Action

Indicates the forwarding action of the ACE.

Permit

: Frames matching the ACE may be forwarded and learned.

Deny

: Frames matching the ACE are dropped.

Rate Limiter

Indicates the rate limiter number of the ACE. The allowed range is 1 to 16. When

Disabled

is displayed,

the rate limiter operation is disabled.

Port Copy

Indicates the port copy operation of the ACE. Frames matching the ACE are copied to the port number.

The allowed values are

Disabled

or a specific port number. When

Disabled

is displayed, the port copy

operation is disabled.

Mirror

Specify the mirror operation of this port. The allowed values:

Enabled:

Frames received on the port are mirrored.

Disabled

: Frames received on the port are not mirrored.

The default value is "Disabled."

CPU

Forward packet that matched the specific ACE to CPU.

CPU Once

Forward first packet that matched the specific ACE to CPU.

Counter

The counter indicates the number of times the ACE was hit by a frame.

Содержание 560931


























































































































































































































































































Результаты поиска

Содержание 560931

Отзывы:

Бренды по названию

Популярные бренды

Intellinet 560931, Руководство пользователя

Результаты поиска

Содержание 560931

Отзывы:

Бренды по названию

Популярные бренды