Intellinet 560931 Скачать руководство пользователя страница 257

Страница: 257 / 281

257

capabilities defined for the previous Generic Endpoint (Class I) and Media Endpoint (Class II) classes,

and are extended to include aspects related to end user devices. Example product categories expected

to adhere to this class include (but are not limited to) end user communication appliances, such as IP

Phones, PC-based softphones, or other communication appliances that directly support the end user.

Discovery services defined in this class include provision of location identifier (including ECS / E911

information), embedded L2 switch support and inventory management.

LLDP-MED Capabilities

describes the neighbor unit's LLDP-MED capabilities. The possible

capabilities:

1. LLDP-MED capabilities

2. Network Policy

3. Location Identification

4. Extended Power via MDI-PSE

5. Extended Power via MDI-PD

6. Inventory

7. Reserved

Application Type

indicating the primary function of the application(s) defined for this network policy,

advertised by an Endpoint or Network Connectivity Device. The possible application types are shown

below.

1. Voice - for use by dedicated IP Telephony handsets and other similar appliances supporting

interactive voice services. These devices are typically deployed on a separate VLAN for ease of

deployment and enhanced security by isolation from data applications.

2. Voice Signalling - for use in network topologies that require a different policy for the voice signalling

than for the voice media.

3. Guest Voice - to support a separate limited feature-set voice service for guest users and visitors with

their own IP Telephony handsets and other similar appliances supporting interactive voice services.

4. Guest Voice Signalling - for use in network topologies that require a different policy for the guest

voice signalling than for the guest voice media.

Содержание 560931


























































































































































































































































































Результаты поиска

Содержание 560931

Отзывы:

Бренды по названию

Популярные бренды

Intellinet 560931, Руководство пользователя

Результаты поиска

Содержание 560931

Отзывы:

Бренды по названию

Популярные бренды