Intellinet 560931 Скачать руководство пользователя страница 213

Страница: 213 / 281

213

Version

dot1xAuthLastEapolFrameVersion

802.1X-based

The protocol version number carried in the most

recently received EAPOL frame.

MAC-based

Not applicable.

Identity

802.1X-based

The user name (supplicant identity) carried in the

most recently received Response Identity EAPOL

frame.

MAC-based

Not applicable.

Selected

Counters

Selected Counters

The Selected Counters table is visible when the port is in one of the following administrative states:

• Multi 802.1X

• MAC-based Auth.

The table is identical to and is placed next to the Port Counters table, and will be empty if no MAC

address is currently selected. To populate the table, select one of the attached MAC Addresses from

the table below.

Attached

MAC

Addresses

Identity

Shows the identity of the supplicant, as received in the Response Identity EAPOL frame.

Clicking the link causes the supplicant's EAPOL and Backend Server counters to be shown in the

Selected Counters table. If no supplicants are attached, it shows

No supplicants attached

This column is not available for MAC-based Auth.

MAC Address

For Multi 802.1X, this column holds the MAC address of the attached supplicant.

For MAC-based Auth., this column holds the MAC address of the attached client.

Clicking the link causes the client's Backend Server counters to be shown in the Selected Counters

table. If no clients are attached, it shows

No clients attached

VLAN ID

This column holds the VLAN ID that the corresponding client is currently secured through the Port

Содержание 560931


























































































































































































































































































Результаты поиска

Содержание 560931

Отзывы:

Бренды по названию

Популярные бренды

Intellinet 560931, Руководство пользователя

Результаты поиска

Содержание 560931

Отзывы:

Бренды по названию

Популярные бренды