Intellinet 560931 Скачать руководство пользователя страница 61

Страница: 61 / 281

Action

Select whether forwarding is permitted ("Permit") or denied ("Deny"). The default value is "Permit."

Rate Limiter ID

Select which rate limiter to apply on this port. The allowed values are

Disabled

or the values

through

The default value is "Disabled."

Disabled

Port Copy

Select which port frames are copied on. The allowed values are

Disabled

or a specific port number. The

default value is "Disabled."

Mirror

Specify the mirror operation of this port. The allowed values:

Enabled:

Frames received on the port are mirrored.

Disabled

: Frames received on the port are not mirrored.

The default value is "Disabled."

Logging

Specify the logging operation of this port. The allowed values:

Enabled

: Frames received on the port are stored in the System Log.

Disabled

: Frames received on the port are not logged.

The default value is "Disabled." Note that the System Log memory size and logging rate are limited.

Shutdown

Specify the port shut-down operation of this port. The allowed values:

Enabled:

If a frame is received on the port, the port will be disabled.

Disabled

: Port shut down is disabled.

The default value is "Disabled."

Counter

Counts the number of frames that match this ACE.

Buttons

Save:

Click to save changes.

Reset:

Click to undo any changes made locally and revert to previously saved values.

Refresh:

Click to refresh the page. Any changes made locally will be undone.

Clear:

Click to clear the counter.

Содержание 560931


























































































































































































































































































Результаты поиска

Содержание 560931

Отзывы:

Бренды по названию

Популярные бренды

Intellinet 560931, Руководство пользователя

Результаты поиска

Содержание 560931

Отзывы:

Бренды по названию

Популярные бренды