Intellinet 560931 Скачать руководство пользователя страница 101

Страница: 101 / 281

101

Refresh :

Refreshes the displayed table starting from the “VLAN” input fields.

<< :

Updates the table starting from the first entry in the VLAN Table; i.e., the entry with the lowest VLAN

ID.

>>:

Update the table, staring with the entry after the last entry currently displayed.

Save:

To save the configuration.

Reset

Click to undo any changes made locally and revert to previously saved values.

4.9.1.3 IGMP Snooping / Port Group Filtering

IGMP Snooping Port Group Filtering Configuration

Delete

Check to delete the entry. It will be deleted during the next save.

Port

The logical port for the settings.

Filtering Groups

The IP Multicast Group that will be filtered.

Adding New Filtering Group

Click to add a new entry to the Group Filtering table. Specify the Port and Filtering Group of the new entry.
Click "Save."

Warning message about the Filtering Group.
The range of the IP Multicast is 224.0.0.0 - 239.255.255.255.

Содержание 560931


























































































































































































































































































Результаты поиска

Содержание 560931

Отзывы:

Бренды по названию

Популярные бренды

Intellinet 560931, Руководство пользователя

Результаты поиска

Содержание 560931

Отзывы:

Бренды по названию

Популярные бренды