Intellinet 560931 Скачать руководство пользователя страница 223

Страница: 223 / 281

223

Source MAC address.

Buttons

Auto-refresh:

Click this box to enable an automatic refresh of the page at regular intervals.

Refresh:

Click to refresh the page immediately.

Clear:

Flushes all dynamic entries.

/<<:

Updates the table starting from the first entry in the Dynamic IP Source Guard Tables.

>>:

Updates the table, starting with the entry after the last entry currently displayed.

6.1.3.3 Security / AAA

This page provides an overview of the status of the RADIUS servers configurable on the Authentication

configuration page.

RADIUS Authentication Servers

The RADIUS server number. Click to navigate to detailed statistics for this server.

IP Address

The IP address and UDP port number (in <IP Address>:<UDP Port> notation) of this server.

State

The current state of the server. This field takes one of the following values:

Disabled:

The server is disabled.

Not Ready:

The server is enabled, but IP communication is not yet up and running.

Ready:

The server is enabled, IP communication is up and running, and the RADIUS module is ready

Содержание 560931


























































































































































































































































































Результаты поиска

Содержание 560931

Отзывы:

Бренды по названию

Популярные бренды

Intellinet 560931, Руководство пользователя

Результаты поиска

Содержание 560931

Отзывы:

Бренды по названию

Популярные бренды