Intellinet 560931 Скачать руководство пользователя страница 214

Страница: 214 / 281

214

Security module.

State

The client can either be authenticated or unauthenticated. In the authenticated state, it is allowed to

forward frames on the port, and in the unauthenticated state, it is blocked. As long as the backend

server hasn't successfully authenticated the client, it is unauthenticated. If an authentication fails for

one or the other reason, the client will remain in the unauthenticated state for Hold Time seconds.

Last Authentication

Shows the date and time of the last authentication of the client (successful as well as unsuccessful).

Buttons

The port select box determines which port is affected when clicking the buttons.

Auto-refresh

Check this box to enable an automatic refresh of the page at regular intervals.

Click to refresh the page immediately.

This button is available in the following modes:

• Force Authorized

• Force Unauthorized

• Port-based 802.1X

• Single 802.1X

Click to clear the counters for the selected port.

This button is available in the following modes:

• Multi 802.1X

Содержание 560931


























































































































































































































































































Результаты поиска

Содержание 560931

Отзывы:

Бренды по названию

Популярные бренды

Intellinet 560931, Руководство пользователя

Результаты поиска

Содержание 560931

Отзывы:

Бренды по названию

Популярные бренды