IBM E10, Руководство по обслуживанию, Страница: 74 / 279

5. Logically connect the service terminal to the cluster:
v
OS/2 Operating System:
a. At the EBTERM window, select and click on the Connect menu option.
b. At the Connect dialog box, click on 2105 Direct Connect.
c. Go to step 6.
v
Windows Operating System:
a. At the NetTerm window, single click on File and then Phone Directory
b. At the Phone Directory, click on IBM 2105 VSS/ESS (Direct Connect, IBM3151 emulation),
and then click on Connect.
c. Go to step 6.
6. When the Copyright and Login screen is displayed, enter the Login ID of
SERVICE
and press Enter.
When asked for the Service Password, take one of the following actions:
v
Early level service code, no password is required. Press Enter and go to step 7.
v
New level service code, the screen will display:
ENTER PASSWORD DISPLAYED ON 2105 CLUSTER OP-PANEL service’s Password
The 2105 Cluster Op-panel will display the following:
LOGIN PASSWORD:
xyxyxy
Enter the password displayed on the 2105 Cluster Op-panel and then press Enter.
Note: Note: After three failed login attempts, a different password will be displayed. If the Copyright
was not displayed.
If the Copyright screen was not displayed and the cluster bay has been powered up for more than ten
minutes, go to
″
MAP 4360: Cluster Operator Panel Codes
″
in chapter 3 of the Enterprise Storage
Server Service Guide, Volume 1 to repair the cluster bay problem.
7. See “Service Login Operation Menus, with Cluster IML Complete” on page 59, or select one of the
following Main Service Menu activities:
Main Service Menu
Information on page:
Repair Menu 61
Figure 63. Cluster Bay Connectors for Service Terminal (S008027m)
Service Login Connection
58
VOLUME 3, ESS Service Guide