IBM E10, Руководство по обслуживанию, Страница: 240 / 279

CALL-OUT POLICY SETUP MENU
1. Call-Out policy (First/All):
Currently First
2. Remote timeout, (in seconds):
Currently 120
3. Remote latency, (in seconds):
Currently 2
4. Number of retries:
Currently 2
98. Return to Previous Menu
v
Call Out policy may be set to ’first’ or ’all’. If call out policy is set to ’first’, the SP will stop at the first
successful call out to one of the following numbers in the order listed:
1. Service Center
2. Customer Administration Center
3. Pager
If call out policy is set to ’all’, the SP will attempt a call out to all the following numbers in the order
listed:
1. Service Center
2. Customer Administration Center
3. Pager
Remote timeout and Remote latency are functions of your service provider’s catcher computer. You
should take the defaults or contact your service provider for recommended settings.
Number of retries is the number of times you want the server to retry calls that resulted in busy signals
or other error messages.
Customer Account Setup Menu:
Customer Account SetupMenu
1. Customer Account Number:
Currently Unassigned
2. Customer RETAIN Login UserID:
Currently Unassigned
3. Customer RETAIN Login Password:
Currently Unassigned
98. Return to Previous Menu
v
Customer Account Number is assigned by your service provider for record keeping and billing. If you
have an account number, enter it here. Otherwise, leave this field blank.
v
Customer RETAIN Login UserID and Customer RETAIN Login Password apply to a service function
to which your service provider may or may not have access. Leave these fields blank if your service
provider does not use RETAIN.
Reboot/Restart Policy Setup Menu: Reboot describes bringing the system hardware back up from
scratch, for example, from a system reset or power on. The boot process ends when control passes to the
operating system process.
Service Processor Connection
224
VOLUME 3, ESS Service Guide