IBM E10, Руководство по обслуживанию, Страница: 45 / 279

Cluster Bay, Cable Location Codes (F10/F20)
v
Cluster Bay 1, (R1-T1- ) or Cluster Bay 2, (R1-T2- )
– Serial Interface Cable (S1/S2), (S1 = R1-Tx-P2-S1.1) (S2 = R1-Tx-P2-S2.1)
– Serial Interface Cable (S3), (R1-Tx-P2-S3.1)
– Power Planar Cable (IB11), (R1-Tx-P3-IB11.1)
– Power Planar Cable (IB12), (R1-Tx-P3-IB12.1)
– Power Planar Cable (IB13), (R1-Tx-P3-IB13.1)
– Power Planar Cable (IB14), (R1-Tx-P3-IB14.1)
– Power Planar Cable (IB15), (R1-Tx-P3-IB15.1)
– SCSI Drive Signal Cable, (R1-Tx-P2-Z1.1)
– Cluster Bay Power Planar to Docking Connector Cable, (R1-Tx-N1.1)
– Cluster Operator Panel Cable, (R1-Tx-P2-L1.1)
– Diskette Drive Signal Cable, (R1-Tx-P2-D1.1)
– Cluster Internal Power Cable, (R1-Tx-P3-IB17.1)
– Cluster Drive Power Cable, (R1-Tx-P3-IB18.1)
– NVS Crossover to I/O Attachment Card Cable, (R1-Tx-P2-I5 to I6)
Use the cluster cable removal and replacement procedure to locate any of the cables listed above, see
″
Cables, Cluster Bay
″
in chapter 4 of the Enterprise Storage Server Service Guide, Volume 2.
SSA DASD Drawer Component Physical Location Codes, Model 020
Drawer
To locate a SSA DASD Model 020 drawer in a 2105, see “Locating a DDM Bay or SSA DASD Model 020
or 040 Drawer in a 2105 Rack” on page 6.
1
Drawer power control panel, (Rx-Yxx-C9)
2
Disk Drive Module (front), DDM (Model 020 drawer) (Rx-Yxx-Dxx),
See “7133 Drawer, Disk Drive Module Location Codes” on page 31
1
AIRFLOW
Figure 36. Cluster Bay Fan Removal (S008808m)
Locations
2105 Model Exx/Fxx and Expansion Enclosure Locations, CHAPTER 7
29