IBM E10, Руководство по обслуживанию, Страница: 169 / 279

ESC Description of ESC
2A12 Dead Man Timer
2A13 MMIO Read Parity
2A14 PCI Master Abort
2A15 PCI Target Abort
2A16 PCI Parity
2A17 PCI Internal Parity
2A18 PCI MMIO Time-out
2A19 Cache ECC
2A1A Watchdog timer 2nd click
2A1B Cache Control RAM parity
2A1C Data Store dead memory
2A1D Data Store parity error
2A1E Data store ECC Error
2A1F Data store error on cache read
2A20 SCache freeze bit on
2A21 403 write to IOARRIN Queue when full
2A22 Parity error DS filing cache
2A23 403 Reg write less than 4 bytes
2A24 NVRAM range error
2A25 Data Store range error
2A26 Internal RAM Access without Diag bit
2A27 Non 4 byte write to cache
2A28 Write while protected to L2 cache area
2A29 BIU bank protection error
2A2A BIU Bank Non configured error
2A2B BIU Bus error
2A2C BIU Time-out
2A2D Parity error
2A2E Access to non configured bank
2A2F Bus error
2A30 Bus time-out
2A31 Data Storage Exception
2A32 Instruction Storage Exception
2A33 Unexpected Timer Interrupt
2A34 Unexpected INT 3
2A35 Unexpected DMA Complete interrupt
2A36 Unknown Critical Interrupt
2A37 Unexpected Generic software interrupt
2A38 Sequencer Error
2A39 Bad RAM parity on write detected
2A3A Out of Range/protected memory access
2105 Exception Symptom Codes
Error Messages, Diagnostic Codes, and Service Reports, CHAPTER 9
153