IBM BladeCenter S SAS RAID Controller Module, Инструкция по установке и эксплуатации

Страница: 69 / 216

-id : id of the alert message to be taken action on .
-ctlr : slotID of the controller where you want the action to be taken place on an alert
message.
[-create] : This option can be used to create a generic alert with the alert code specified
by ’-code’ option. The valid range for the alert code is between 10000-19999.
The description and details of these codes can be found in RAS user guide.
[-clear] : This option can be used to clear a generic alert with the alert code specified
by ’-code’ option. The valid range for the alert code is between 10000-19999.
Example:
<CLI> alert -get
Current Machine Local Time: 04/02/2009
11:24:34 AM
Existing Alerts :
__________________________________________________________________________________________
|AlertCode| Id | Time |SlotID| Severity | WWN | Ackable | MaskState |
|==========================================================================================|
|
5600 | 2 |20090325124508| 0| Info |5005076b074059ff| 1 | Masked |
|------------------------------------------------------------------------------------------|
| Msg: Illegal host 0x500062b00007ccc0 access attempted
|
|==========================================================================================|
battery
Use this command to manage the Battery Backup Units.
Command arguments:
<CLI> battery -ctlr [0|1] -get
Where:
v [0|1]
- Allows you to select controller 0 or 1.
When you issue this command with the
-get
option, the current status of the
battery is displayed:
Example:
<CLI> battery -ctlr 0 -get
Controller 0
Basic battery type and status
BBU State
: 1 (Working)
BBU Fault Code : 0 (None)
Part Number : 45W4439
Serial Number : YK10MY2810D2
FRU Number : 45W5002
FirmwareRev : 58.0
Expiration Date : Sat Jul 23 12:00:00 2016
Charging state information
Charging
: False
Capacity (Hours) : 72+
<CLI>
Chapter 8. Using the RAID Controller command line interface
59