IBM BladeCenter S SAS RAID Controller Module, Инструкция по установке и эксплуатации

Страница: 78 / 216

Serial Number :
Slot # : 0
Status : Good
event log
The
event log
command detects and analyzes errors by using a trace capability.
Trace information is captured in a file in the controller which the system
administrator can browse. Information is displayed or stored for ALSAL, ARTS, or
TLC modules. Information can also be displayed or stored for all modules.
Use this command with the
-show
option to display the event log captured by the
system for one or all of the modules.
Use this command with the
-save
option to store the event log captured by the
system for one or all of the modules. Information is saved to a file named
EVENTLOG_ timestamp
. A maximum of three files remains in the system. If you issue
-save
when three files exist in the system, the oldest file is deleted before the new
one can be saved. You can retrieve the deleted file with a getFile mechanism
defined and implemented in external software by using the gSoap protocol. You can
also retrieve other dump information, such as cdump and controller log , in the
same way.
Command arguments:
<CLI> event log [-show [all|arts|alsal|tlc] | -save [all|arts|alsal|tlc] ]
Where:
v [all|arts|alsal|tlc]
- Allows selection of all modules or one module.
Examples:
<CLI> event log –show all
.. .. ..
<CLI> event log –save arts
Traces saved to file named EVENTLOG_03312008123456.trace
locate
The
locate
command illuminates the information LEDs on the drives
corresponding to the objects you select.
Command argument:
<CLI> locate
Please select one of this options
Usage : [ -off | -getobject | -setobject ]
COMMAND-HELP: locate object
This command lights up the LED on the drives corresponding to the objects selected
Usage
: locate [ -off ] | [ -getobject -[drive | pool | volume | ctlr | bbu | enclosure ] ] |
[-setobject [ -drive [ slot | all] | -pool poolname | -volume poolname:volumename |
-ctlr [0|1] | -bbu [0|1] | -enclosure [0|1|2] | -number objectnumber] ]
This command lights up the LED on the drives corresponding to the objects selected.
If only drive object is selected,
[-setobject]
: This command lights up the LED on the selected objects.
If the selected object is a drive, the LED on that drive is litup. If the
selected object is a pool or a volume, LEDs on all the drives making up that
68
IBM SAS RAID Controller Module: Installation and User's Guide IBM BladeCenter S SAS RAID Controller Module