IBM BladeCenter S SAS RAID Controller Module, Инструкция по установке и эксплуатации

Страница: 94 / 216

Running the global spare command with the
-delete
option deletes a global spare.
Specify the drive by bay position or number. When you specify the drive by a
number, that number refers to the sequence number that appears on the list
displayed on running this command with the
-get
option. Run this command with
the
-get
option just before running it with the
-delete
number option to make an
internal reference list. An error message is displayed if you run the global spare
command with the
-delete
option without first running it with the
-get
option.
Example:
<CLI> global spare –delete –slot 1
Global spare deleted from Controller Enclosure 1.
<CLI> global spare –get
Drive# Enclosure SerialNo Cap Pool Usage State Ct10 Ct11 RPM
0 2 J3YWKGSJ 33GB -- GLS OK 1 1 0
1 1 J3YXDVJJ 33GB -- GLS OK 1 1 0
2 1 JBV1HE7J 33GB -- GLS OK 1 1 0
<CLI> global spare –delete –number 2
Global spare deleted from Controller Enclosure 1.
host
Use this command to add a host World Wide Name (WWN) to the controller list of
hosts or to get the list of hosts added to the controller .
Command arguments:
<CLI>host –[add WWN| get]
Where:
v WWN
- Specifies host WWN to add to controller list of hosts or host WWN for
which logical unit numbers (LUNs) will be mapped.
Examples:
<CLI> host –add 1234567890abcdef
Host added with WWN 1234567890abcdef.
<CLI> host –get
HostWWN
784875485454 : LUNs Mapped
LUN Permission Volume
3 ACCESS_READWRITE pool1:vol1
HostWWN 123456789abcdef0 : No LUNs Mapped
HostWWN 123456789abcdef1 : No LUNs Mapped
84
IBM SAS RAID Controller Module: Installation and User's Guide IBM BladeCenter S SAS RAID Controller Module