IBM BladeCenter S SAS RAID Controller Module, Инструкция по установке и эксплуатации

Страница: 81 / 216

list features
Use this command to display currently enabled feature fields.
Command arguments:
<CLI> list features
Example:
<CLI> list features
Current Machine Local Time: 08/26/2008
03:25:34 PM
____________________________________________________
| S.No |
Features | Availability |
|______|_________________________|___________________|
|
0| Base Features | Enabled |
| 1| Bound Mode | Enabled |
| 2| Volume Copy | Disabled |
| 3| Snapshot Copy | Disabled |
| 4| Max Drives Supported | 12 |
| 5| Max Hosts Supported | 6 |
|______|_________________________|___________________|
mountpolicy
Use this command to set and display the mount policy.
Command arguments:
<CLI> mountpolicy –[get | set [-automount [on|off]]]
Where:
v -get
displays the current mount policy
v -set
sets a new mount policy.
-automount
is required with the
-set
parameter.
Example:
<CLI> mountpolicy –get
<CLI> mountpolicy –set –automount on
mountstate
Use this command to query the mount states of drives, pools, batteries, media
trays, and enclosures (Disk Storage Modules) in the system.
Command arguments:
<CLI> mountstate [-getobject -[drive |pool |mediatray |enclosure |bbu ] |
-setobject -[mount [-drive <<E:T><E:T> ...> | -bbu [0|1] | -mediatray 0 |
-enclosure <<num><num> ...>]|dismount [-drive <<E:T> <E:T> ...> |
-pool <<poolname> <poolname> ...> | -bbu [0|1] | -mediatray 0 |
-enclosure <<num> <num> ...> [-okdegradded]]] ]
Where:
v -getobject
queries the mount state of the selected object
v -setobject
set the mount state of the selected object
The mount or dismount state of a component tells you if that component is
available or unavailable. When querying a system component, some
-get
options
are available but it is important to keep note of the following:
Chapter 8. Using the RAID Controller command line interface
71