IBM BladeCenter S SAS RAID Controller Module, Инструкция по установке и эксплуатации

Страница: 65 / 216

detail volume verbose
The
detail volume verbose
command creates output detailing information about
all of the Logical Unit Numbers (LUNs). A LUN is a number assigned to a logical
unit.
Command arguments:
<CLI> detail volume verbose
Example:
<CLI> detail volume verbose
______________________________________________________________________
|
Name |RaidType| HostWWN | LUN | Size | Status |
|__________________|________|_________________|______|_______|________|
|
pool1:vol1| 0| 784875485454| 3| 4GB| Viable|
|__________________|________|_________________|______|_______|________|
list controller
The
list controller
command creates output providing summary information
about each controller. The status of a controller is the actual running state of the
controller.
Command arguments:
<CLI> list controller
____________________________________________________________________
| Ctlr# | Controller | Status | Ports | LUNs |
|_____________|________________|_________________|_________|_________|
|
0 | Ctrl0| MASTERBOUND| 1| 1|
| 1 | Ctrl1| SLAVEBOUND| 1| 1|
|_____________|________________|_________________|_________|_________|
Examples:
<CLI> list controller
_____________________________________________________________________
|
Ctlr# | Controller | Status | Ports | LUNs |
|_____________|________________|_________________|_________|_________|
|
0 | Ctrl0| STARTING| 1| 1|
| 1 | Ctrl1| SHUTDOWN| 1| 1|
|_____________|________________|_________________|_________|_________|
Chapter 8. Using the RAID Controller command line interface
55