IBM BladeCenter S SAS RAID Controller Module, Инструкция по установке и эксплуатации

Страница: 68 / 216

list volume
The
list volume
command creates output providing summary information about
all volumes. The volume name displays as
poolname:volumename
.
The possible states of a volume are:
v
Viable
v Degraded
v
InTransition
v Inited
An Inited state indicates that the volume has been initialized.
Command arguments:
<CLI> list volume
Example:
<CLI> list volume
________________________________________________________________________
| vol# | VolumeName | Cap | RaidType | Status |
|______|___________________________|_________|___________|_______________|
|
0| pool1:vol1| 4GB| 0| Viable|
| 1| Group0:vol1| 183GB| 5| Viable|
| 2| ADMIN:v2| 197GB| 10| Degraded |
| 3| MyData:MyVolume| 4GB| 0| Inited|
| 4| pl23:volume0| 44GB| 0| InTransition|
|______|___________________________|_________|___________|_______________|
System control and configuration commands
Use the RAID Controller command line interface to perform administrative tasks
for the device. This topic details commands about system control and
configuration.
alert
The alert command displays system alerts, changes the state of system alerts, and
creates a generic alert. Use the
-get
option to display alerts generated in the
system at any given point. To change the state of the alerts specified by the alert
code and alert id, use the
-mask
,
-unmask
, or
-ack
option. Use the
-create
option to
create a generic alert with the alert code specified by the
–code
option.
Note: Refer to the Troubleshooting section for description and details on the alerts
and codes.
Command arguments:
<CLI> alert [ -get | -mask | -unmask | -ack | -savehistory | -create | -clear]
-help option
Usage : alert [ -get | [-create|-clear] -code genericAlertCode | -savehistory |
-[ mask | unmask | ack ] -code AlertCode -id Id -ctlr SlotID ]
[-get] : Displays the alerts generated in the system at any given point.
[-mask] : When this command is used with mask/unmask or ack options, it can be used to
change the state of the alerts in the system specified by the alert code and
alert id.
[-savehistory] : Saves alert history into a file.
-code
: alert code of the alert you want to take action on.
58
IBM SAS RAID Controller Module: Installation and User's Guide IBM BladeCenter S SAS RAID Controller Module