IBM Aspera HST Скачать руководство пользователя страница 154

Страница: 154 / 353

| ascp4: Transferring from the Command Line with Ascp 4 |

154

The TCP provider of the sender can also be specified with the following format:

tcp://:

port

option

value

option

value

]]

With this format,

ascp4

listens on the specified port up to a specified time (

maxidle

, see the following description

of options for TCP provider URLs).
The TCP provider URL accepts the following options:

port=

— Set the network port number, default: 0.

iosize=

— Specify the read/write size, default: 32 KB.

maxsize=

— Set the maximum stream length, in bytes, no default.

maxtime=

— Set the maximum stream duration, in seconds, no default.

maxidle=

— Set the maximum idle duration, in seconds, default: 10 sec.

rcvbufsz=

— Set the receive buffer size, default: 4 MB.

sndbufsz=

— Set the send buffer size, default: 4 MB.

ifaddr=

ip_address

— Specify the TCP connection interface address.

srcaddr=

ip_address

— Specify the TCP connection source-specific address.

UDP provider

A UDP data stream can be specified for

ascp4

I/O by using a URL that starts with

udp

. If the UDP stream is a

multicast IP address, then

ascp4

connects to the multicast address.

ascp4

reads the UDP datagrams on the source

and writes UDP datagrams on the destination. A UDP-provider filepath has the following format:

udp://

ip_address

port

option

value

option

value

]]

The UDP provider URL accepts the following options:

pktbatch={0|1}

— Enable packet batching in read/write. Default: 1.

maxsize=

— Set the maximum stream length. Default: unlimited.

maxtime=

— Set the maximum stream duration, in seconds. Default: unlimited.

maxidle=

— Set the maximum idle duration, in seconds. Default: unlimited.

rcvbufsz=

— Set the receive buffer size. Default: 10 MB.

sndbufsz=

— Set the send buffer size. Default: 10 MB.

ifaddr=

ip_address

— Set the multicast interface. Default: 0.0.0.0.

srcaddr=

ip_address

— Set the multicast source for IGMPb3 source-specific multicast.

ttl=

— Set the multicast time-to-live. Default: 1.

loopback=

— Set the multicast loopback. Default: 1.

dontfrag=

— Prevent fragmentation of outgoing packets. Default: 0.

Data Streaming Command Syntax

The

ascp4

that is installed with HST Server can be used for data streaming as well as regular file transfers. The

command line is similar to a regular

ascp4

file transfer, but the source and destination are URI paths. The license

prohibits video streaming. A separate product, IBM Aspera Streaming for Video, is available for video streaming. For

more information, see the

IBM Aspera Streaming for Video User Guide

Required Configuration for Multicast-to-Multicast Transfers

The transfer user who authenticates the multicast-to-multicast data stream transfer must have no docroot configured

aspera.conf

. A file restriction can be set instead to restrict access.

Run the following command to unset a docroot and set a file restriction:

# asconfigurator -x

"set_user_data;user_name,

username

;absolute,AS_NULL;file_restriction,|

restriction

Содержание Aspera HST


































































































































































































































































































































































Результаты поиска

Содержание Aspera HST

Отзывы:

Похожие инструкции для Aspera HST

Бренды по названию

Популярные бренды

IBM Aspera HST, Руководство администратора

Результаты поиска

Содержание Aspera HST

Отзывы:

Похожие инструкции для Aspera HST

Бренды по названию

Популярные бренды