IBM 5400-006, Руководство по настройке и эксплуатации

Страница: 187 / 210

Control Codes
46.Cancel Emphasized Printing: ESX 0E 00 01 18 (X ' 1B 7E 0E 00 01 18 ' )
The emphasized printing mode is cancelled by this code.
47.Set Double Strike Printing: ESX 0E 00 01 19 (X ' 1B 7E 0E 00 01 19 ' )
If this code is received at the beginning of a print line, double strike
starts immediately.
Note: This command is ignored if the printing speed is other than
normal speed specified by initial value or a switch on the operation
panel.
48.Cancel Double Strike Printing: ESX 0E 00 01 1A (X ' 1B 7E 0E 00 01 1A ' )
If this code is received at the beginning of a print line, double strike
printing is cancelled immediately. If it is received at some point in a
print line, double strike printing is cancelled at the beginning of the next
line.
Note: This command is ignored if the printing speed is other than
normal speed specified by initial value or a switch on the operation
panel.
49.Set/Cancel Underlining: ESX 11 00 01 n (X ' 1B 7E 11 00 01 n ' )
Sets or cancels underlining.
The setting or cancelling of underlining is specified by n as follows:
n=B
'
0000 00n1n0
'
n0 1 :Start Underlining
0 :End Underlining
n1 1 :Skip Blanks
0 :Skip Blanks
The maximum number of underlined blocks that can be printed by this
control code is 256.
Appendix C. Control Codes (Connected to a Parallel Port)
C-15