IBM 5400-006, Руководство по настройке и эксплуатации

Страница: 31 / 210

Testing the IBM 5400-006 Printer
A pattern similar to the following is printed. Printing stops when the pattern is
printed.
4
Press Form Feed or Line Feed to feed the form to a position where it can be
cut off easily. Open the set cover and cut off the form at the perforation.
5
Open the rear door and take out the printed forms. Check their quality.
6
Close the rear door.
7
Press Stop, then Cancel to exit the print test mode.
The print test is finished.
Note: All characters can be printed in the print test. To print all characters
according to the currently selected emulation mode, after step 2 press Step
Feed Up or Step Feed Down to show ALL CHARACTER in the lower part
of the message. Then press Start to print all the characters.
Go to 1.3, Connecting to the Host System.
Chapter 1. Installation
1-21