IBM 5400-006, Руководство по настройке и эксплуатации

Страница: 197 / 210

Considerations in Creating a 5577 Data Stream
However, the following codes use the line pitch set most recently, regardless of the
line pitch in the current line:
Ÿ
ESX 04 n1 n2 c1 c2 (c3)
(for c1-1)
Ÿ
ESX 19 n1 n2 vt1 vt2 ... vtn
Ÿ
ESX 1B 00 01 n
When a character scaling is set, the upper end of each character is aligned with
that of the single-width and single-height character. The line pitch does not change
if a half-width and half-height character size is specified.
The left and right ends of each character are positioned as shown below:
Appendix C. Control Codes (Connected to a Parallel Port)
C-25