8. Option 857 Amplitude Fidelity Performance
14. Key in the following analyzer settings:
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
SWEEP
15. Press MARKER
to
center
the
signal on the display.
16. Key in the following analyzer settings:
.O Hz
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Hz
17. Press MARKER A. Step the frequency synthesizer output
amplitude from + 10
to -80
in 10
steps, noting
the MARKER A amplitude (a negative value) at each step and
recording it in column 2 of
5-2. Allow several sweeps after
each step for the video filtered trace to reach its final amplitude.
18. Subtract the value in column 1 from the value in column 2 for
each setting to find the fidelity error.
19. Subtract the greatest negative fidelity error from the greatest
positive fidelity error for calibrated amplitude steps from -10
to -70
The result should be
20. Subtract the greatest negative fidelity error from the greatest
positive fidelity error for calibrated amplitude steps from -10
to -90
The result should be
5-l.
Log Amplitude Fidelity (10 Hz
Option 857)
Frequency
1
2
Fidelity Error
Synthesizer Calibrated MARKER A Amplitude (Column 2 Column 1)
Amplitude Amplitude
Step
0 (ref)
0 (ref)
0 (ref)
0
- 1 0
- 1 0
- 2 0
- 2 0
-30
- 3 0
- 4 0
- 4 0
- 5 0
- 5 0
- 6 0
- 6 0
- 7 0
- 7 0
- 8 0
- 8 0
- 9 0
5-4 Option 857
Содержание HP 8566B
