manualshive.com logo in svg

HP Fabric OS v7.0.1, Руководство администратора

Поделиться
Скачать
HP Fabric OS v7.0.1 Скачать руководство пользователя страница 81

Fabric OS Administrator’s Guide

43

53-1002446-01

Ports

3

Port decommissioning

Fabric OS 7.0.0 and later provides an automated mechanism to remove an E_Port or E_Port trunk 
port from use. This feature identifies the target port and communicates the intention to 
decommission the port to those systems within the fabric affected by the action. Each affected 
system can agree or disagree with the action, and these responses are automatically collected 
before a port is decommissioned. 

Note that all members of a trunk group must have an equal link cost value in order for any of the 
members to be decommissioned. If any member of a trunk group does not have an equal cost, 
requests to decommission a trunk member will fail and an error reminding the caller of this 
requirement is produced. 

Note the following restrictions of port decommissioning:

•

The local switch and the remote switch on the other end of the E_Port must both be running 
Fabric OS 7.0.0 or later.

•

Port decommissioning is not supported on links configured for encryption or compression.

•

Port decommissioning is not supported on ports with DWDM, CWDM, or TDM.

•

Port decommissioning requires that the lossless feature is enabled on both the local switch 
and the remote switch.

Use the portDecom [

slot

/]

port 

command to begin the decommission process. 

Setting port speeds

1. Connect to the switch and log in using an account with admin permissions.

2. Enter the portCfgSpeed command. 

Example of setting the port speed

The following example sets the speed for port 3 on slot 2 to 4 Gbps:

ecp:admin> 

portcfgspeed 2/3 4

 

done.

The following example sets the speed for port 3 on slot 2 to autonegotiate:

ecp:admin> 

portcfgspeed 2/3 0

 

done.

NOTE

For the FR4-18i blade, the maximum speed supported is 4 Gbps.

Setting the same speed for all ports on the switch

1. Connect to the switch and log in using an account with admin permissions.

2. Enter the switchCfgSpeed command.

Example of setting the switch speed

The following example sets the speed for all ports on the switch to 8 Gbps:

switch:admin> 

switchcfgspeed 8

 

Committing configuration...done.

Содержание Fabric OS v7.0.1









































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды