manualshive.com logo in svg

HP Fabric OS v7.0.1, Руководство администратора

Поделиться
Скачать
HP Fabric OS v7.0.1 Скачать руководство пользователя страница 451

Fabric OS Administrator’s Guide

413

53-1002446-01

Top Talker monitors

20

Adding a Top Talker monitor to a port (port mode)

1. Connect to the switch and log in using an account with admin permissions.

2. Enter the perfTTmon

 --

add command.

perfttmon --add [egress | ingress] [

slotnumber

/]

port

For example, to monitor the incoming traffic on port 7:

perfttmon --add ingress 7

 

To monitor the outgoing traffic on slot 2, port 4 on a Backbone:

perfttmon --add egress 2/4

 

Adding Top Talker monitors on all switches in the fabric (fabric mode)

When fabric mode is enabled, you can no longer install Top Talker monitors on an F_Port unless you 
delete fabric mode.

1. Connect to the switch and log in using an account with admin permissions.

2. Remove any EE monitors in the fabric, as described in 

“Deleting EE monitors”

 on page 404. 

Fabric mode Top Talker monitors and EE monitors cannot both exist in the fabric.

3. Enter the perfTTmon

 --

add fabricmode command.

perfttmon --add fabricmode

 

The system responds:

Before enabling fabric mode, please remove all EE monitors in the fabric
continue? (yes, y, no, n): 

4. Type y at the prompt to continue.

Top Talker monitors are added to E_Ports in the fabric and fabric mode is enabled. Any Top 
Talker monitors that were already installed on F_Ports are automatically uninstalled.

If EE monitors are present on the local switch, the command fails with the message:

Cannot install Fabric Mode Top Talker because EE monitor is already present

If EE monitors are present on remote switches, the command succeeds; however, on the 
remote switches, fabric mode fails and a raslog message is displayed on those switches.

If a new switch joins the fabric, you must run the perfTTmon

 --

add fabricmode command on 

that switch. The Top Talker configuration information is 

not

 automatically propagated to the 

new switch.

Displaying the top 

n

 bandwidth-using flows on a port (port mode)

1. Connect to the switch and log in using an account with admin permissions.

2. Enter the perfTTmon

 --

show command.

perfttmon --show [

slotnumber

/]

port

 [

n

] [wwn | pid]

Содержание Fabric OS v7.0.1









































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды