manualshive.com logo in svg

HP Fabric OS v7.0.1, Руководство администратора

Поделиться
Скачать
HP Fabric OS v7.0.1 Скачать руководство пользователя страница 296

258

Fabric OS Administrator’s Guide

53-1002446-01

Zone configurations

11

Example 

switch:admin> cfgdelete "testcfg"

switch:admin> 

cfgsave

You are about to save the Defined zoning configuration. This
action will only save the changes on the Defined configuration.
Any changes made on the Effective configuration will not
take effect until it is re-enabled. Until the Effective
configuration is re-enabled, merging new switches into the 
fabric is not recommended and may cause unpredictable
results with the potential of mismatched Effective Zoning
configurations.
Do you want to save Defined zoning configuration only? (yes, y, no, n): [no] 

y

Clearing changes to a configuration

•

Enter the cfgTransAbort command. 

When this command is executed, all changes since the last save operation (performed with the 
cfgSave, cfgEnable, or cfgDisable command) are cleared.

Example 

In the following example, assume that the removal of a member from zone1 was done in error:

switch:admin> 

zoneremove "zone1","3,5"

 

switch:admin> 

cfgtransabort

 

Viewing all zone configuration information

If you do not specify an operand when executing the cfgShow command to view zone 
configurations, then all zone configuration information (both defined and effective) displays. If 
there is an outstanding transaction, then the newly edited zone configuration that has not yet been 
saved is displayed. If there are no outstanding transactions, then the committed zone configuration 
displays.

1. Connect to the switch and log in using an account with admin permissions.

2. Enter the cfgShow command with no operands. 

Example 

switch:admin>

 cfgshow

Defined configuration:
  cfg:   USA1    Blue_zone
  cfg:   USA_cfg Purple_zone; Blue_zone
  zone:  Blue_zone
     1,1; array1; 1,2; array2
  zone:  Purple_zone
     1,0; loop1
  alias: array1  21:00:00:20:37:0c:76:8c; 21:00:00:20:37:0c:71:02
  alias: array2  21:00:00:20:37:0c:76:22; 21:00:00:20:37:0c:76:28
  alias: loop1   21:00:00:20:37:0c:76:85; 21:00:00:20:37:0c:71:df
  
Effective configuration:
  cfg:   USA_cfg
  zone:  Blue_zone
      1,1
      21:00:00:20:37:0c:76:8c
      21:00:00:20:37:0c:71:02

Содержание Fabric OS v7.0.1









































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды