manualshive.com logo in svg

HP Fabric OS v7.0.1, Руководство администратора

Поделиться
Скачать
HP Fabric OS v7.0.1 Скачать руководство пользователя страница 391

Fabric OS Administrator’s Guide

353

53-1002446-01

Admin Domain management for physical fabric administrators

17

3. Enter the ad 

--

rename command with the present name and the new name.

ad --rename 

present_name new_name

4. Enter the appropriate command based on whether you want to save or activate the Admin 

Domain definition:

•

To save the Admin Domain definition, enter ad 

--

save.

•

To save the Admin Domain definition and directly apply the definition to the fabric, enter ad 

--

apply.

The Admin Domain numbers remain unchanged after the operation.

Example of changing the name of Admin Domain Eng_AD to Eng_AD2

switch:AD255:admin> 

ad --rename Eng_AD Eng_AD2

Deleting an Admin Domain

When you delete an Admin Domain, its devices no longer have access to the members of the zones 
with which it was associated.

1. Connect to the switch and log in using an account with admin permissions.

2. Switch to the Admin Domain that you want to delete.

ad --select

 

ad_id

3. Enter the appropriate command to clear the zone database under the Admin Domain you want 

to delete.

•

To remove the effective configuration, enter cfgdisable.

•

To remove the defined configuration, enter cfgclear.

•

To save the changes to nonvolatile memory, enter cfgsave.

4. Switch to the AD255 context.

ad --select 255

5. Enter the ad 

--

delete command.

ad --delete 

ad_id

The ad 

--

delete command prompts you for confirmation before triggering the deletion. The 

command succeeds whether the Admin Domain is in an activated or deactivated state.

6. Enter the ad 

--

apply command to save the Admin Domain definition and directly apply the 

definition to the fabric.

Example of deleting Admin Domain AD_B3

switch:AD255:admin> 

ad --delete AD_B3

You are about to delete an AD.
This operation will fail if zone configuration exists in the AD
Do you want to delete ’AD_B3’ admin domain (yes, y, no, n): [no] 

y

switch:AD255:admin>

Содержание Fabric OS v7.0.1









































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды