manualshive.com logo in svg

HP Fabric OS v7.0.1, Руководство администратора

Поделиться
Скачать
HP Fabric OS v7.0.1 Скачать руководство пользователя страница 419

Fabric OS Administrator’s Guide

381

53-1002446-01

Temporary licenses

18

Temporary licenses

A temporary license applies a “try-before-you-buy” approach to certain features so that you can 
experience the feature and its capabilities prior to buying the license. Once you have installed the 
license, you are given a time limit to use the feature. 

A temporary license can be either a regular temporary license or a universal temporary license:

•

A regular temporary license is available on a per-switch basis.

•

A universal temporary license can be installed on a switch, but can be applied to multiple 
switches.

The following licenses are available as temporary or universal temporary licenses:

•

10 Gigabit FCIP/Fibre Channel license (slot-based)

•

Advanced Extension license (slot-based)

•

Advanced FICON Acceleration license (slot-based)

•

Adaptive Networking with QoS license

•

Advanced Performance Monitoring license

•

Fabric (E_Port) license

•

Fabric Watch license

•

FICON Management Server (CUP) license

•

Extended Fabrics license

•

High Performance Extension over FCIP/FC license

•

Integrated Routing license

•

Server Application Optimization license

•

ISL Trunking license

Restrictions on upgrading temporary slot-based licenses

If the capacity of the permanent license is equal to or greater than the capacity of the temporary 
license and you use the same slot assignments. then replacing the temporary license with a 
permanent license is non-disruptive. If either condition changes, however, then the process is 
disruptive.

If the permanent license is for fewer slots than the temporary license, you must do the following.

1. Remove the temporary license. The removal process disables the feature.

2. Install the permanent license on the appropriate slots.

If the permanent license is for different slots than the temporary license, you must do the following.

1. Install the permanent license. The temporary license is automatically replaced on the original 

slots.

2. Deconfigure the application that uses the licensed feature on the original slots.

3. Remove the license from the original slots using the licenseSlotCfg -remove command. 

4. Add the license to the new slots using the licenseSlotCfg -add command.

Содержание Fabric OS v7.0.1









































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды