HP Fabric OS v7.0.1 Скачать руководство пользователя страница 390

Страница: 390 / 584

352

Fabric OS Administrator’s Guide

53-1002446-01

Admin Domain management for physical fabric administrators

4. Enter the appropriate command based on whether you want to save or activate the Admin

Domain definition:

•

To save the Admin Domain definition, enter ad

save.

•

To save the Admin Domain definition and directly apply the definition to the fabric, enter ad

apply.

Example of adding two switch ports, designated by

domain,index,

to AD1

switch:AD255:admin>

ad --add AD1 -d "100,5; 4,1"

Removing members from an Admin Domain

If you remove the last member of an Admin Domain, that Admin Domain is automatically deleted.

1. Connect to the switch and log in using an account with admin permissions.

2. Switch to the AD255 context, if you are not already in that context.

ad --select 255

3. Enter the ad

remove command using the -d option to specify device and switch port

members and the -s option to specify switch members.

ad --remove

ad_id

-d "

dev_list

" -s "

switch_list

Removing the last member element of an Admin Domain deletes the Admin Domain.

4. Enter the appropriate command based on whether you want to save or activate the Admin

Domain definition:

•

To save the Admin Domain definition, enter ad

save.

•

To save the Admin Domain definition and directly apply the definition to the fabric, enter ad

apply.

Example 1

The following example removes port 5 of domain 100 and port 3 of domain 1 from AD1.

switch:AD255:admin>

ad --remove AD1 –d "100,5; 1,3"

Example 2

The following example removes switch 100 from the membership list of AD4.

switch:AD255:admin>

ad --remove AD4 –s "100"

Renaming an Admin Domain

Use this procedure if you want to change the name of an Admin Domain. You can also change
auto-assigned names (AD

The rename operation does not take effect if the Admin Domain you want to rename is part of the
effective configuration.

1. Connect to the switch and log in using an account with admin permissions.

2. Switch to the AD255 context, if you are not already in that context.

ad --select 255

Содержание Fabric OS v7.0.1









































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Fabric OS v7.0.1

Отзывы:

Бренды по названию

Популярные бренды

HP Fabric OS v7.0.1, Руководство администратора

Результаты поиска

Содержание Fabric OS v7.0.1

Отзывы:

Бренды по названию

Популярные бренды