manualshive.com logo in svg

HP Fabric OS v7.0.1, Руководство администратора

Поделиться
Скачать
HP Fabric OS v7.0.1 Скачать руководство пользователя страница 291

Fabric OS Administrator’s Guide

253

53-1002446-01

Default zoning mode

11

Typically, when you disable the zoning configuration in a large fabric with thousands of devices, the 
name server indicates to all hosts that they can communicate with each other. In fact, each host 
can receive an enormous list of PIDs, and ultimately cause other hosts to run out of memory or 
crash. To ensure that all devices in a fabric do not see each other during a configuration disable 
operation, set the default zoning mode to No Access.

NOTE

For switches in large fabrics, the default zone mode should be set to No Access. You cannot disable 
the effective configuration if the default zone mode is All Access and you have more than 120 
devices in the fabric.

Admin Domain considerations: If you want to use Admin Domains, you must set the default zoning 
mode to No Access prior to setting up the Admin Domains. You cannot change the default zoning 
mode to All Access if user-specified Admin Domains are present in the fabric.

Setting the default zoning mode

NOTE

You should not change the default zone mode from No Access to All Access if there is no effective 
zone configuration and more than 120 devices are connected to the fabric.

1. Connect to the switch and log in using an account with admin permissions.

2. Enter the cfgActvShow command to view the current zone configuration.

3. Enter the defZone command with one of the following options:

defzone --noaccess

defzone --allaccess

This command initiates a transaction (if one is not already in progress).

4. Enter either the cfgSave, cfgEnable, or cfgDisable command to commit the change and 

distribute it to the fabric. The change will not be committed and distributed across the fabric if 
you do not enter one of these commands.

Example 

switch:admin> 

defzone --noaccess

 

You are about to set the Default Zone access mode to No Access
Do you want to set the Default Zone access mode to No Access ? (yes, y, no, n): 
[no] 

y

switch:admin> 

cfgsave

You are about to save the Defined zoning configuration. This 
action will only save the changes on Defined configuration. 
Any changes made on the Effective configuration will not 
take effect until it is re-enabled. Until the Effective
configuration is re-enabled, merging new switches into the 
fabric is not recommended and may cause unpredictable
results with the potential of mismatched Effective Zoning
configurations.
Do you want to save Defined zoning configuration only?  (yes, y, no, n): [no] 

y

Updating flash ...

Содержание Fabric OS v7.0.1









































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды