manualshive.com logo in svg

HP Fabric OS v7.0.1, Руководство администратора

Поделиться
Скачать
HP Fabric OS v7.0.1 Скачать руководство пользователя страница 505

Fabric OS Administrator’s Guide

467

53-1002446-01

FC-FC routing overview

24

•

VEX_Ports are supported on the FR4-18i Router Blade, but EX_Ports are not supported. The 
FR4-18i blade is not supported in the same chassis as the FX8-24 blade.

•

The Backbones have a limit of 128 EX_Ports for each chassis.

Refer to the 

Network OS Administrator’s Guide

 for supported Network OS platforms.

Supported configurations for FC-FC routing

FC-FC routing supports the following configurations:

•

FC router connected to a Fabric OS nonsecured edge fabric.

•

FC router connected to a Fabric OS secured edge fabric.

•

FC router connected to a Brocade Network OS edge fabric (Network OS v2.1.1 or later).

•

FC router connected to an M-EOS Open Mode edge fabric.

•

FC router connected to an M-EOS Fabric Mode edge fabric.

•

FC router interoperating with legacy FC routers (Brocade 7500 switch or FR4-18i blade).

In configurations with two backbone fabrics connected to the same edge fabric, routing is not 
supported between edge fabrics that are not directly attached to the same backbone fabric. 
Routing over multiple backbone fabrics is a multi-hop topology and is not allowed.

In an edge fabric that contains a mix of administrative domain (AD)-capable switches and switches 
that are not aware of AD, the FC router must be connected directly to an AD-capable switch. For 
more information, refer to 

“Use of Admin Domains with LSAN zones and FC-FC routing”

 on 

page 485. 

VEX edge to VEX edge device sharing is not supported.

Unsupported configurations for Network OS connectivity

Note the following configuration limitations for Network OS connectivity:

•

All of the platforms listed in 

“Supported platforms for FC-FC routing”

 on page 466 support 

FC-FC routing to a Brocade Network OS fabric, except for the following:

-

Brocade Encryption Switch

-

FR4-18i Router Blade

•

VEX_Ports do not support Network OS connectivity.

•

FCoE devices connected to a Brocade 8000 switch or FCOE10-24 blade cannot communicate 
with FCoE devices in the Network OS fabric.

•

If Admin Domains are enabled, connectivity between the Fabric OS fabric and a Brocade 
Network OS fabric is not supported.

•

Connectivity between a Brocade Network OS fabric and an M-EOS fabric is not supported.

Содержание Fabric OS v7.0.1









































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды