manualshive.com logo in svg

HP Fabric OS v7.0.1, Руководство администратора

Поделиться
Скачать
HP Fabric OS v7.0.1 Скачать руководство пользователя страница 427

Fabric OS Administrator’s Guide

389

53-1002446-01

Ports on Demand

18

        12 port assignments are provisioned by a full POD license
   8 ports are assigned to installed licenses:
         8 ports are assigned to the base switch license
         0 ports are assigned to the full POD license
  Ports assigned to the base switch license:
     1, 2, 5, 6, 8*, 21, 22, 23
  Ports assigned to the full POD license:
     None
  Ports not assigned to a license:
     0, 3, 4, 7, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20

  16 license reservations are still available for use by unassigned ports
   1 license assignment is held by an offline port (indicated by *)

Disabling Dynamic Ports on Demand

Disabling the Dynamic POD feature changes the POD method to static and erases any prior port 
license associations or assignments the next time the switch is rebooted. 

1. Connect to the switch and log in using an account with admin permissions. 

2. Enter the licensePort

 --

method command with the static option to change the license 

assignment method to static.

switch:admin> 

licenseport --method static

The POD method has been changed to static.
Please reboot the switch now for this change to take effect.

3. Enter the reboot command to restart the switch.

4. Enter the licensePort

 --

show command to verify the switch changed to static POD.

switch:admin> 

licenseport --show

24 ports are available in this switch
Full POD license is installed

Dynamic POD method is in use

24 port assignments are provisioned for use in this switch:
12 port assignments are provisioned by the base switch license
12 port assignments are provisioned by a full POD license
24 ports are assigned to installed licenses:
12 ports are assigned to the base switch license
12 ports are assigned to the full POD license
Ports assigned to the base switch license:
1, 2, 3, 4, 5, 6, 7, 8, 17, 18, 19, 20
Ports assigned to the full POD license:
0, 9, 10, 11, 12, 13, 14, 15, 16, 21, 22, 23

Reserving a port license

You can allocate licenses by reserving and releasing POD assignments to specific ports. Disabled 
ports are not candidates for automatic license assignment by the Dynamic POD feature. 
Persistently disable an otherwise viable port to prevent it from coming online, and thereby preserve 
a license assignment for another port. 

Reserving a license for a port assigns a POD license to that port whether the port is online or 
offline. That license will not be available to other ports that come online before the specified port.

To allocate licenses to a specific port instead of automatically assigning them as the ports come 
online, reserve a license for the port. The port receives a POD assignment if any are available.

Содержание Fabric OS v7.0.1









































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды