manualshive.com logo in svg

HP Fabric OS v7.0.1, Руководство администратора

Поделиться
Скачать
HP Fabric OS v7.0.1 Скачать руководство пользователя страница 395

Fabric OS Administrator’s Guide

357

53-1002446-01

Admin Domain management for physical fabric administrators

17

10:00:00:00:02:00:00:00; 10:00:00:00:03:00:00:00

Effective configuration:
 cfg:

AD1_cfg

 zone:

AD1_BlueZone

10:00:00:00:02:00:00:00
10:00:00:00:03:00:00:00

Zone CFG Info for AD_ID: 2   (AD Name: AD2, State: Active) :

Defined configuration:
 cfg:

AD2_cfg AD2_GreenZone

 zone:

AD2_GreenZone

10:00:00:00:04:00:00:00; 10:00:00:00:05:00:00:00

Effective configuration:
 cfg:

AD2_cfg

 zone:

AD2_GreenZone

10:00:00:00:04:00:00:00
10:00:00:00:05:00:00:00

sw0:admin> 

zone --copy AD1.AD1_BlueZone AD0_BlueZone

sw0:admin> 

zone --copy AD2.AD2_GreenZone AD0_GreenZone

sw0:admin> 

cfgadd "AD0_cfg", "AD0_BlueZone; AD0_GreenZone"

sw0:admin> 

cfgenable AD0_cfg

You are about to enable a new zoning configuration.
This action will replace the old zoning configuration with the
current configuration selected. If the update includes changes 
to one or more traffic isolation zones, the update may result in  
localized disruption to traffic on ports associated with
the traffic isolation zone changes
Do you want to enable 'AD0_cfg' configuration  (yes, y, no, n): [no] 

y

zone config "AD0_cfg" is in effect
Updating flash ...

sw0:admin> 

ad --select 255

sw0:AD255:admin> 

ad --add AD0 -d "10:00:00:00:03:00:00:00; 

10:00:00:00:04:00:00:00; 10:00:00:00:05:00:00:00"

sw0:AD255:admin> 

ad --apply

You are about to enforce the saved AD configuration.
This action will trigger AD apply to all switches in the fabric
Do you want to apply all admin domains  (yes, y, no, n): [no] 

y

sw0:AD255:admin> 

ad --clear -f

You are about to delete all ADs definitions and zone databases under them.
This could involve multiple independent zone transactions and
no auto recovery will be done in case of failure in the middle.
Do you want to clear all admin domains (yes, y, no, n): [no] 

y

sw0:AD255:admin> 

ad --apply

You are about to enforce the saved AD configuration.
This action will trigger AD apply to all switches in the fabric
Do you want to apply all admin domains  (yes, y, no, n): [no] 

y

Содержание Fabric OS v7.0.1









































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды