manualshive.com logo in svg

HP Fabric OS v7.0.1, Руководство администратора

Поделиться
Скачать
HP Fabric OS v7.0.1 Скачать руководство пользователя страница 285

Fabric OS Administrator’s Guide

247

53-1002446-01

Zone aliases

11

Creating an alias

1. Connect to the switch and log in using an account with admin permissions.

2. Enter the aliCreate command, using the following syntax: 

alicreate "

aliasname

", "

member

[; member...]"

3. Enter the cfgSave command to save the change to the defined configuration.

The cfgSave command ends and commits the current zoning transaction buffer to nonvolatile 
memory. If a transaction is open on a different switch in the fabric when this command is run, 
the transaction on the other switch is automatically aborted. A message displays on the other 
switches to indicate that the transaction was aborted.

Example 

switch:admin> 

alicreate "array1", "2,32; 2,33; 2,34; 4,4"

 

switch:admin> 

alicreate "array2", "21:00:00:20:37:0c:66:23; 4,3"

 

switch:admin> 

alicreate "loop1", "4,6"     

 

switch:admin> 

cfgsave

 

You are about to save the Defined zoning configuration. This
action will only save the changes on the Defined configuration.
Any changes made on the Effective configuration will not
take effect until it is re-enabled. Until the Effective
configuration is re-enabled, merging new switches into the 
fabric is not recommended and may cause unpredictable
results with the potential of mismatched Effective Zoning
configurations.
Do you want to save Defined zoning configuration only? (yes, y, no, n): [no] 

y

Adding members to an alias

1. Connect to the switch and log in using an account with admin permissions.

2. Enter the aliAdd command, using the following syntax:

aliadd "

aliasname

", "

member

[; member...]"

3. Enter the cfgSave command to save the change to the defined configuration.

The cfgSave command ends and commits the current zoning transaction buffer to nonvolatile 
memory. If a transaction is open on a different switch in the fabric when this command is run, 
the transaction on the other switch is automatically aborted. A message displays on the other 
switches to indicate that the transaction was aborted.

Example 

switch:admin> 

aliadd "array1", "1,2"

 

switch:admin> 

aliadd "array2", "21:00:00:20:37:0c:72:51"

 

switch:admin> 

aliadd "loop1", "5,6" 

switch:admin> 

cfgsave

 

You are about to save the Defined zoning configuration. This
action will only save the changes on the Defined configuration.
Any changes made on the Effective configuration will not
take effect until it is re-enabled. Until the Effective
configuration is re-enabled, merging new switches into the 
fabric is not recommended and may cause unpredictable
results with the potential of mismatched Effective Zoning configurations.
Do you want to save Defined zoning configuration only? (yes, y, no, n): [no] 

y

Содержание Fabric OS v7.0.1









































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды