manualshive.com logo in svg

HP Fabric OS v7.0.1, Руководство администратора

Поделиться
Скачать
HP Fabric OS v7.0.1 Скачать руководство пользователя страница 426

388

Fabric OS Administrator’s Guide

53-1002446-01

Ports on Demand

18

If the switch detects more active links than allowed by the current POD licenses, then some ports 
will not be assigned a POD license. Ports that do not receive a POD assignment have a state of 

No 

Sync

 or 

In Sync

; these ports are not allowed to progress to the online state. Ports that cannot be 

brought online because of insufficient POD licenses have a state of 

(No POD License) Disabled

. You 

can use the switchShow command to display the port states.

Displaying the port license assignments

When you display the available licenses, you can also view the current port assignment of those 
licenses.

1. Connect to the switch and log in using an account with admin permissions.

2. Enter the licensePort

 --

show command.

Example showing manually assigned POD licenses

switch:admin> 

licenseport --show

  24 ports are available in this switch
     Full POD license is installed
     

Dynamic POD method is in use

  24 port assignments are provisioned for use in this switch:
        12 port assignments are provisioned by the base switch license
        12 port assignments are provisioned by a full POD license
  24 ports are assigned to installed licenses:
        12 ports are assigned to the base switch license
        12 ports are assigned to the full POD license
  Ports assigned to the base switch license:
     1, 2, 3, 4, 5, 6, 7, 8, 17, 18, 19, 20
  Ports assigned to the full POD license:
     0, 9, 10, 11, 12, 13, 14, 15, 16, 21, 22, 23

Enabling Dynamic Ports on Demand

If the switch is in the static POD mode, then activating the Dynamic POD will erase any prior port 
license assignments the next time the switch is rebooted. The static POD assignments become the 
initial Dynamic POD assignments. After the Dynamic POD feature is enabled, you can customize 
the POD license associations.

1. Connect to the switch and log in using an account with admin permissions.

2. Enter the licensePort

 --

method command with the dynamic option to change the license 

assignment method to dynamic.

switch:admin> 

licenseport --method dynamic

The POD method has been changed to dynamic.
Please reboot the switch now for this change to take effect.

3. Enter the reboot command to restart the switch.

switch:admin> 

reboot

4. Enter the licensePort

 --

show command to verify the switch started the Dynamic POD feature.

switch:admin> 

licenseport --show

  24 ports are available in this switch
     Full POD license is installed
     Dynamic POD method is in use
  24 port assignments are provisioned for use in this switch:
        12 port assignments are provisioned by the base switch license

Содержание Fabric OS v7.0.1









































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды