manualshive.com logo in svg

HP Fabric OS v7.0.1, Руководство администратора

Поделиться
Скачать
HP Fabric OS v7.0.1 Скачать руководство пользователя страница 117

Fabric OS Administrator’s Guide

79

53-1002446-01

Frame Redirection

4

FIGURE 9

Single host and target

Figure 9

 demonstrates the flow of Frame Redirection traffic. A frame starts at the host with a 

destination to the target. The port where the appliance is attached to the host switch acts as the 
virtual initiator and the port where the appliance is attached to the target switch is the virtual 
target. 

Creating a frame redirect zone

The first time the zone 

–-

rdcreate command is run, the following zone objects are created by 

default:

•

The base zone object, "red_______base".

•

The redirect (RD) zone configuration, "r_e_d_i_r_c__fg".

NOTE

Frame redirect zones are not supported with D or I initiator target zones.

1. Connect to the switch and log in using an account with admin permissions.

2. Enter the zone 

–-

rdcreate command.

3. Enter the cfgSave command to save the frame redirect zones to the defined configuration.

Example of creating a frame redirect zone 

The following example creates a redirect zone, given a host (10:10:10:10:10:10:10:10), target 
(20:20:20:20:20:20:20:20), virtual initiator (30:30:30:30:30:30:30:30), and virtual target 
(40:40:40:40:40:40:40:40):

switch:admin>

zone --rdcreate 10:10:10:10:10:10:10:10 20:20:20:20:20:20:20:20 \

30:30:30:30:30:30:30:30 40:40:40:40:40:40:40:40 restartable noFCR

Deleting a frame redirect zone

1. Connect to the switch and log in using an account with admin permissions.

2. Enter the zone

 --

rdDelete command to remove the base redirect zone object, 

"red_______base". 

When the base zone is removed, the redirect zone configuration "r_e_d_i_r_c__fg” is removed 
as well.

3. Enter the cfgSave command to save changes to the defined configuration.

Example of deleting a frame redirect zone 

switch:admin> 

zone --rddelete \ 

red_0917_10_10_10_10_10_10_10_10_20_20_20_20_20_20_20_20 

Содержание Fabric OS v7.0.1









































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды