manualshive.com logo in svg

HP Fabric OS v7.0.1, Руководство администратора

Поделиться
Скачать
HP Fabric OS v7.0.1 Скачать руководство пользователя страница 472

434

Fabric OS Administrator’s Guide

53-1002446-01

Trunking overview

22

Types of trunking

Trunking can be between two switches, between a switch and an Access Gateway module, or 
between a switch and a Brocade adapter. The types of trunking are as follows:

•

ISL trunking, or E_Port trunking, is configured on an inter-switch link (ISL) between two Fabric 
OS switches and is applicable only to E_Ports. 

•

ICL trunking is configured on an inter-chassis link (ICL) between two Backbones and is 
applicable only to ports on the core blades.

Refer to 

Chapter 19, “Inter-chassis Links”

 for detailed information about ICL trunking.

•

EX_Port trunking is configured on an inter-fabric link (IFL) between an FC router (EX_Port) and 
an edge fabric (E_Port). The trunk ports are EX_Ports connected to E_Ports. 

See 

“EX_Port frame trunking configuration”

 on page 484 for additional information about 

EX_Port trunking.

•

F_Port trunking is configured on a link between a switch and either an Access Gateway module 
or a Brocade adapter. The trunk ports are F_Ports (on the switch) connected to N_Ports (on the 
Access Gateway or adapter).

•

N_Port Trunking is configured on a link between a switch and either an Access Gateway 
module or a Brocade adapter. It is the same as F_Port trunking. The trunk ports are N_Ports 
(on the Access Gateway or adapter) connected to F_Ports (on the switch). 

For more information, see 

“Configuring F_Port trunking for Brocade adapters”

 on page 448, 

the 

Access Gateway Administrator’s Guide

, and the 

Brocade Adapters Administrators Guide

 for 

more information about configuring this type of trunking.

NOTE

This chapter uses the term 

F_Port trunking

 to refer to a trunk between the F_Ports on a switch and 

the N_Ports on either an Access Gateway module or a Brocade adapter. This type of trunk might be 
referred to as N_Port trunking in the 

Access Gateway Administrator’s Guide

 or 

Brocade Adapters 

Administrator’s Guide

.

Masterless trunking

Masterless trunking means that if the master port goes offline, one of the slave ports automatically 
becomes the new master port, thus avoiding traffic disruption. The new master port uses the old 
master port area and the old master port is assigned a new, unused area. In this way, the PID of the 
trunk does not change if the master port goes offline.

If trunking is not masterless, and if the master port goes offline, traffic disruption can occur 
because the slave ports in the trunk group go offline to select the new master port and then come 
back online.

Masterless trunking is supported for most platforms and trunking types:

•

All F_Port trunking is masterless.

•

ISL and ICL trunking is masterless.

•

EX_Port trunking is masterless, except for the following:

-

Backbones with VF disabled.

Содержание Fabric OS v7.0.1









































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды