manualshive.com logo in svg

HP Fabric OS v7.0.1, Руководство администратора

Поделиться
Скачать
HP Fabric OS v7.0.1 Скачать руководство пользователя страница 261

Fabric OS Administrator’s Guide

223

53-1002446-01

Supported platforms for Virtual Fabrics

10

The following restrictions apply:

•

EX_Ports and VEX_Ports can be in only the base switch.

•

ICL ports cannot be in a logical switch that is using XISLs.

•

All of the user ports in an ICL cable must be in the same logical switch. Distributing the user 
ports within the same cable across multiple logical switches is not supported.

•

The default logical switch cannot use XISLs.

•

The default logical switch cannot be designated as the base switch.

•

VE_Ports on the FR4-18i blade are supported on the base switch only for carrying Fibre 
Channel routing (FCR) traffic to VEX_Ports. These VE_Ports are not supported for carrying 
logical fabric traffic over XISLs.

•

Starting in Fabric OS v7.0.0, VE_Ports on the FX8-24 blade are supported on a logical switch 
that is using an XISL, and on the base switch as an XISL.

NOTE

For the FX8-24 blade, if XISL use is enabled it is not recommended that you configure VE_Ports 
on both the logical switch and the base switch, because FCIP tunnels support only two hops 
maximum.

Virtual Fabrics interaction with other Fabric OS features

Table 48

 lists some Fabric OS features and considerations that apply when using Virtual Fabrics.

FR4-18i: FC ports

GE ports

Yes (F, E)
Yes (VE)

No
Yes (VE)

No
Yes (VE, VEX)

ICL ports

Yes

Yes

Yes

1.

In the Brocade DCX and DCX 8510-8, ports 56–63 of the FC8-64 blade are not supported as E_Ports on the 
default logical switch. The Brocade DCX-4S and DCX 8510-4 do not have this limitation.

2.

In the Brocade DCX and DCX 8510-8, ports 48–63 of the FC8-64 blade are not supported in the base switch. 
The Brocade DCX-4S and DCX 8510-4 do not have this limitation.

TABLE 48

Virtual Fabrics interaction with Fabric OS features 

Fabric OS feature

Virtual Fabrics interaction

Access Gateway

Virtual Fabrics is not supported on a switch if AG mode is enabled.

Admin Domains

Virtual Fabrics and Admin Domains are mutually exclusive and are not supported at the 
same time on a switch. To use Admin Domains, you must first disable Virtual Fabrics; to 
use Virtual Fabrics, you must first delete all Admin Domains.
Refer to 

“Deleting all user-defined Admin Domains non-disruptively”

 on page 354 for 

information on deleting Admin Domains without disrupting device-to-device 
communication.

Configuration upload 
and download

Virtual Fabrics uses a configuration file that is different from the configuration file used 
to download system configuration parameters. Refer to 

Chapter 8, “Maintaining the 

Switch Configuration File,”

 for more information about how Virtual Fabrics affects the 

configuration file.

Encryption

Encryption functionality using the FS8-18 blade is available only on the default logical 
switch.

TABLE 47

Blade and port types supported on logical switches  (Continued)

Blade type

Default logical switch

User-defined logical switch

Base switch

Содержание Fabric OS v7.0.1









































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды