manualshive.com logo in svg

HP Fabric OS v7.0.1, Руководство администратора

Поделиться
Скачать
HP Fabric OS v7.0.1 Скачать руководство пользователя страница 290

252

Fabric OS Administrator’s Guide

53-1002446-01

Default zoning mode

11

1,0; loop1

zone: White_zone

1,3; 1,4

alias: array1 21:00:00:20:37:0c:76:8c; 21:00:00:20:37:0c:71:02
alias: array2 21:00:00:20:37:0c:76:22; 21:00:00:20:37:0c:76:28
alias: loop1 21:00:00:20:37:0c:76:85; 21:00:00:20:37:0c:71:df

3. Enter the zone

 --

validate command to list all zone members that are not part of the current 

zone enforcement table. Note that zone configuration names are case-sensitive; blank spaces 
are ignored.

switch:admin> 

zone --validate "White_zone"

4. Enter the following command to validate all zones in the zone database in the defined 

configuration.

switch:admin> sw5:root> 

zone --validate -m 1

      Defined configuration:
       cfg:   cfg1    zone1
       cfg:   cfg2    zone1; zone2
       zone:  zone1   1,1; ali1
       zone:  zone2   1,1; ali2
       alias: ali1    10:00:00:05:1e:35:81:7f*; 10:00:00:05:1e:35:81:7d*
       alias: ali2    10:00:00:05:1e:35:81:09*; 10:00:00:05:1e:35:81:88*

      ------------------------------------
      ~ - Invalid configuration
      * - Member does not exist

The mode flag -m can be used to specify the zone database location. Supported mode flag 
values are:

•

0 -  zone database from the current transaction buffer

•

1 -  zone database stored from the persistent storage

•

2 -  currently effective zone database.

If no mode options are given, the validated output of all three buffers is shown.

If the -f option is specified, all the zone members that are not enforceable would be expunged 
in the transaction buffer. This pruning operation always happens on the transaction and 
defined buffers. You cannot specify a mode option or specify a zone object as an argument 
with the -f option. This mode flag should be used after the zone has been validated.

Default zoning mode

The default zoning mode controls device access if zoning is not implemented or if there is no 
effective zone configuration. The default zoning mode has two options:

•

All Access—All devices within the fabric can communicate with all other devices.

•

No Access—Devices in the fabric cannot access any other device in the fabric.

The default zone mode applies to the entire fabric, regardless of switch model.

The default setting is All Access.

Содержание Fabric OS v7.0.1









































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды