HP Fabric OS v7.0.1 Скачать руководство пользователя страница 172

Страница: 172 / 584

134

Fabric OS Administrator’s Guide

53-1002446-01

ACL policy management

Example of deleting an ACL policy

switch:admin>

secpolicydelete "DCC_POLICY_010"

About to delete policy Finance_Policy.
Are you sure (yes, y, no, n):[no]

Finance_Policy has been deleted.

Adding a member to an existing ACL policy

As soon as a policy has been activated, the aspect of the fabric managed by that policy is enforced.

1. Connect to the switch and log in using an account with admin permissions, or an account with

OM permissions for the Security RBAC class of commands.

2. Enter the secPolicyAdd command.

3. To implement the change immediately, enter the secPolicyActivate command.

Example of adding to an ACL policy

For example, to add a member to the SCC_POLICY using the switch WWN:

switch:admin>

secpolicyadd "SCC_POLICY", "12:24:45:10:0a:67:00:40"

Member(s) have been added to SCC_POLICY.

Example of adding members to the DCC policy

To add two devices to the DCC policy, and to attach domain 3 ports 1 and 3 (WWNs of devices
are 11:22:33:44:55:66:77:aa and 11:22:33:44:55:66:77:bb):

switch:admin>

secpolicyadd "DCC_POLICY_abc",

"11:22:33:44:55:66:77:aa;11:22:33:44:55:66:77:bb;3(1,3)"

Removing a member from an ACL policy

As soon as a policy has been activated, the aspect of the fabric managed by that policy is enforced.

1. Connect to the switch and log in using an account with admin permissions, or an account with

OM permissions for the Security RBAC class of commands.

2. Enter the secPolicyRemove command.

3. To implement the change immediately, enter the secPolicyActivate command.

Example of removing a member

For example, to remove a member that has a WWN of 12:24:45:10:0a:67:00:40 from the
SCC_POLICY:

switch:admin>

secpolicyremove "SCC_POLICY", "12:24:45:10:0a:67:00:40"

Member(s) have been removed from SCC_POLICY.

Aborting unsaved policy changes

You can abort all ACL policy changes that have not yet been saved.

1. Connect to the switch and log in using an account with admin permissions, or an account with

OM permissions for the Security RBAC class of commands.

2. Enter the secPolicyAbort command.

Содержание Fabric OS v7.0.1









































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Fabric OS v7.0.1

Отзывы:

Бренды по названию

Популярные бренды

HP Fabric OS v7.0.1, Руководство администратора

Результаты поиска

Содержание Fabric OS v7.0.1

Отзывы:

Бренды по названию

Популярные бренды