manualshive.com logo in svg

HP Fabric OS v7.0.1, Руководство администратора

Поделиться
Скачать
HP Fabric OS v7.0.1 Скачать руководство пользователя страница 269

Fabric OS Administrator’s Guide

231

53-1002446-01

Displaying logical switch configuration

10

NOTE

If you are deploying ICLs in the base switch, all ports associated with those ICLs must be assigned 
to the base switch. If you are deploying ICLs to connect to default switches (that is, XISL use is not 
allowed), the ICL ports should be assigned (or left) in the default logical switch. 

1. Connect to the physical chassis and log in using an account with the chassis-role permission.

2. Enter the following command to move ports from one logical switch to another:

lscfg --config

 

fabricID

 

-slot

 

slot

 

-port

 

port

The ports are assigned to the logical switch specified by 

fabricID

 and are removed from the 

logical switch on which they are currently configured.

If the -port option is omitted, all ports on the specified slot are assigned to the logical switch.

NOTE

On the Brocade DCX and DCX 8510-8, the lscfg command does not allow you to add ports 48–
63 of the FC8-64 blade to the base switch. These ports are not supported on the base switch. 
The Brocade DCX-4S and DCX 8510-4 do not have this limitation.

3. Enter y at the prompt.

The ports are automatically disabled, then removed from their current logical switch, and 
assigned to the logical switch specified by 

fabricID

.

Example of assigning ports 18 through 20 to the logical switch with FID 5

sw0:FID128:admin> 

lscfg --config 5 -port 18-20

This operation requires that the affected ports be disabled.
Would you like to continue [y/n]?: 

y

Making this configuration change.  Please wait...
Configuration change successful.
Please enable your ports/switch when you are ready to continue.

Displaying logical switch configuration

1. Connect to the physical chassis and log in using an account with the chassis-role permission. 

2. Enter the following command to display a list of all logical switches and the ports assigned to 

them:

lscfg --show

 [ 

-provision

 ] 

If the -provision option is specified, all ports on all slots are displayed, regardless of the slot 
status.

Example displaying a list of all of the logical switches and the ports assigned to them

sw0:FID128:admin> lscfg --show

Created switches:  128(ds)  4  5  

Port      0     1     2     3     4     5     6     7     8     9  
-------------------------------------------------------------------
FID     128 | 128 | 128 | 128 | 128 | 128 | 128 | 128 |   5 |   5 |

(output truncated)

Содержание Fabric OS v7.0.1









































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды