manualshive.com logo in svg

HP Fabric OS v7.0.1, Руководство администратора

Поделиться
Скачать
HP Fabric OS v7.0.1 Скачать руководство пользователя страница 287

Fabric OS Administrator’s Guide

249

53-1002446-01

Zone creation and maintenance

11

Viewing an alias in the defined configuration

1. Connect to the switch and log in using an account with admin permissions.

2. Enter the aliShow command, using the following syntax

alishow "

pattern

"[, 

mode

]

If no parameters are specified, the entire zone database (both the defined and effective 
configuration) is displayed. 

Example 

The following example shows all zone aliases beginning with “arr”.

switch:admin> alishow "arr*"

alias: array1  21:00:00:20:37:0c:76:8c
alias: array2  21:00:00:20:37:0c:66:23

Zone creation and maintenance

To create a broadcast zone, use the reserved name “broadcast”. Do not give a regular zone the 
name of “broadcast”. See 

“Broadcast zones”

 on page 244 for additional information about this 

special type of zone.

Virtual Fabrics considerations: Zone definitions should not include logical port numbers. Zoning is 
not enforced on logical ports.

Creating a zone

1. Connect to the switch and log in using an account with admin permissions.

2. Enter the zoneCreate command, using the following syntax:

zonecreate "

zonename

", "

member

[; member...]"

To create a broadcast zone, use the reserved name “broadcast”.

3. Enter the cfgSave command to save the change to the defined configuration.

The cfgSave command ends and commits the current zoning transaction buffer to nonvolatile 
memory. If a transaction is open on a different switch in the fabric when this command is run, 
the transaction on the other switch is automatically aborted. A message displays on the other 
switches to indicate that the transaction was aborted.

Example 

switch:admin> zonecreate "greenzone", "2,32; 2,33; 2,34; 4,4"
switch:admin> zonecreate "bluezone", "21:00:00:20:37:0c:66:23; 4,3"

switch:admin> 

zonecreate "broadcast", "1,2; 2,33; 2,34"

switch:admin> 

cfgsave

You are about to save the Defined zoning configuration. This
action will only save the changes on the Defined configuration.
Any changes made on the Effective configuration will not
take effect until it is re-enabled. Until the Effective
configuration is re-enabled, merging new switches into the 
fabric is not recommended and may cause unpredictable
results with the potential of mismatched Effective Zoning configurations.
Do you want to save Defined zoning configuration only? (yes, y, no, n): [no] 

y

Содержание Fabric OS v7.0.1









































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды