manualshive.com logo in svg

HP Fabric OS v7.0.1, Руководство администратора

Поделиться
Скачать
HP Fabric OS v7.0.1 Скачать руководство пользователя страница 268

230

Fabric OS Administrator’s Guide

53-1002446-01

Deleting a logical switch

10

"fabricshow" on FID 4:

Switch ID   Worldwide Name           Enet IP Addr    FC IP Addr      Name
-------------------------------------------------------------------------
 14: fffc0e 10:00:00:05:1e:82:3c:2b 10.32.79.105    0.0.0.0        >"switch_4"

(output truncated)

Deleting a logical switch

You must remove all ports from the logical switch before deleting it.

You cannot delete the default logical switch.

NOTE

If you are in the context of the logical switch you want to delete, you are automatically logged out 
when the fabric ID changes. To avoid being logged out, make sure you are in the context of a different 
logical switch from the one you are deleting.

1. Connect to the physical chassis and log in using an account with admin permissions.

2. Remove all ports from the logical switch, as described in 

“Adding and moving ports on a logical 

switch.”

3. Enter the following command to delete the logical switch:

lscfg --delete

 

fabricID

 

The 

fabricID

 parameter is the fabric ID of the logical switch to be deleted. 

Example of deleting the logical switch with FID 7

switch_4:FID4:admin> 

lscfg --delete 7

All active login sessions for FID 7 have been terminated.
Switch successfully deleted.

Adding and moving ports on a logical switch

This procedure explains how to add and move ports on logical switches.

You add ports to a logical switch by moving the ports from one logical switch to another. See 

“Supported platforms for Virtual Fabrics”

 on page 222 for port restrictions.

If you want to remove a port from a logical switch, you cannot remove it from the logical switch; you 
must move the port to a different logical switch.

When you move a port from one logical switch to another, the port is automatically disabled. Any 
performance monitors that were installed on the port are deleted. If monitors are required on the 
port in its new location, you must manually reinstall them on the port after the move.

NOTE

If the logical switch to which the port is moved has fabric mode Top Talkers enabled, then if the port 
is an E_Port, fabric mode Top Talker monitors are automatically installed on that port.

Содержание Fabric OS v7.0.1









































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды