HP 4500G PWR 24-Port, Руководство по настройке

Страница: 939 / 1968

1-15
Configuring a multicast group filter globally
Follow these steps to configure a multicast group filter globally:
To do... Use the command... Remarks
Enter system view
system-view
—
Enter IGMP Snooping view
igmp-snooping
—
Configure a multicast group
filter
group-policy acl-number
[
vlan vlan-list
]
Required
By default, no group filter is
globally configured, that is,
hosts in VLANs can join any
valid multicast group.
Configuring a multicast group filter on a port or a group of ports
Follow these steps to configure a multicast group filter on a port or a group of ports:
To do... Use the command... Remarks
Enter system view
system-view
—
interface interface-type
interface-number
Enter Ethernet port/Layer 2
aggregate port view or port
group view
port-group manual
port-group-name
Required
Use either approach
Configure a multicast group
filter
igmp-snooping group-policy
acl-number
[
vlan vlan-list
]
Required
By default, no group filter is
configured on the current port,
that is, hosts on this port can
join any valid multicast group.
Configuring Multicast Source Port Filtering
With the multicast source port filtering feature enabled on a port, the port can be connected with
multicast receivers only rather than with multicast sources, because the port will block all multicast data
packets while it permits multicast protocol packets to pass.
If this feature is disabled on a port, the port can be connected with both multicast sources and multicast
receivers.
Configuring multicast source port filtering globally
Follow these steps to configure multicast source port filtering globally:
To do... Use the command... Remarks
Enter system view
system-view
—
Enter IGMP Snooping view
igmp-snooping
—
Enable multicast source port
filtering
source-deny port interface-list
Required
Disabled by default