HP 4500G PWR 24-Port, Руководство по настройке

Страница: 701 / 1968

1-1
1
Route Policy Configuration
A route policy is used on a router for route filtering and attributes modification when routes are received,
advertised, or redistributed.
When configuring route policy, go to these sections for information you are interested in:
z
Introduction to Route Policy
z
Route Policy Configuration Task List
z
Defining Filters
z
Configuring a Route Policy
z
Displaying and Maintaining the Route Policy
z
Route Policy Configuration Example
z
Troubleshooting Route Policy Configuration
Route policy in this chapter involves both IPv4 route policy and IPv6 route policy.
Introduction to Route Policy
Route Policy
A route policy is used on a router for route filtering and attributes modification when routes are received,
advertised, or redistributed.
To configure a route policy, you need to define some filters based on the attributes of routing information,
such as destination address, advertising router’s address and so on. The filters can be set beforehand
and then applied to the route policy.
Filters
There are six types of filters: ACL, IP prefix list, AS path ACL, community list, extended community list
and route policy.
ACL
ACL involves IPv4 ACL and IPv6 ACL. An ACL is configured to match the destinations or next hops of
routing information.
For ACL configuration, refer to
ACL configuration
in the
Security Volume
.
IP prefix list
IP prefix list involves IPv4 and IPv6 prefix list.