HP 4500G PWR 24-Port, Руководство по настройке

Страница: 1681 / 1968

7-6
Controlling Web Users by Source IP Addresses
The switch 4800G support Web-based remote management, which allows Web users to access the
switches using the HTTP protocol. By referencing access control lists (ACLs), you can control the
access of Web users to the switches.
Prerequisites
The control policies to be implemented on Web users are decided, including the source IP addresses to
be controlled and the control action, that is, whether to allow or deny the access.
Controlling Web Users by Source IP Addresses
This feature is achieved through the configuration of basic ACLs, the numbers of which are in the range
2000 to 2999. For the definition of ACLs, see
ACL Configuration
in the
Security Volume
.
Follow these steps to configure controlling Web users by source IP addresses:
To do… Use the command… Remarks
Enter system view
system-view
—
Create a basic ACL or enter
basic ACL view
acl
[
ipv6
]
number acl-number
[
match-order
{
config
|
auto
} ]
Required
The
config
keyword is
specified by default.
Define rules for the ACL
rule
[
rule-id
] {
permit
|
deny
} [
source
{
sour-addr sour-wildcard
|
any
} |
time-range time-name
|
fragment
|
logging
]*
Required
Quit to system view
quit
—
Reference the ACL to control
Web users
ip http acl acl-number
Required
Forcing Online Web Users Offline
The network administrators can run a command to force online Web users offline.
Perform the following operation to force online Web users offline:
To do… Use the command… Remarks
Force online Web users offline
free web-users
{
all
|
user-id user-id
|
user-name user-name
}
Required
Use this command in
user view
Configuration Example
Network requirements
Configure a basic ACL to allow only Web users using IP address 10.110.100.52 to access the switch.