1-9
IPv6 BGP advertises routes passing the specified policy to peers. Using the
protocol
argument can filter
only the routes redistributed from the specified protocol. If no
protocol
is specified, IPv6 BGP filters all
routes to be advertised, including redistributed routes and routes imported with the
network
command.
Configuring Inbound Route Filtering
Follow these steps to configure inbound route filtering:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter BGP view
bgp
as-number
—
Enter IPv6 address family view
ipv6-family
—
Configure inbound route
filtering
filter-policy
{
acl6-number
|
ipv6-prefix
ipv6-prefix-name
}
import
Required
Not configured by default.
Apply a routing policy to routes
from an IPv6 peer/peer group
peer
{
ipv6-group-name
|
ipv6-address
}
route-policy
route-policy-name
import
Required
Not applied by default.
Specify an ACL to filter routes
imported from an IPv6
peer/peer group
peer
{
ipv6-group-name
|
ipv6-address
}
filter-policy
acl6-number
import
Required
Not specified by default.
Specify an AS path ACL to filter
routing information imported
from an IPv6 peer/peer group
peer
{
ipv6-group-name
|
ipv6-address
}
as-path-acl
as-path-acl-number
import
Required
Not specified by default.
Specify an IPv6 prefix list to
filter routing information
imported from an IPv6
peer/peer group
peer
{
ipv6-group-name
|
ipv6-address
}
ipv6-prefix
ipv6-prefix-name
import
Required
Not specified by default.
Specify the upper limit of
prefixes allowed to receive from
an IPv6 peer/peer group
peer
{
ipv6-group-name
|
ipv6-address
}
route-limit
limit
[
percentage
]
Optional
Unlimited by default.
z
Only routes passing the configured filtering can be added into the local IPv6 BGP routing table.
z
Members of a peer group can have different inbound route filtering policies.
Configuring IPv6 BGP and IGP Route Synchronization
With this feature enabled and when a non-BGP router is responsible for forwarding packets in an AS,
IPv6 BGP speakers in the AS cannot advertise routing information to outside ASs unless all routers in
the AS know the latest routing information.
Содержание 4500G PWR 24-Port
