HP 4500G PWR 24-Port, Руководство по настройке

Страница: 1287 / 1968

1-13
Select
Portal Service Management
>
Device
from the navigation tree to enter the portal device
configuration page. Then, click
Add
to enter the page for adding a portal device, as shown in Figure 1-7 .
z
Type the device name
Switch
.
z
Type the IP address of the interface on the switch for connecting the user.
z
Type the key, which must be the same as that configured on the switch.
z
Set whether to enable IP address reallocation. Direction portal authentication is used in this
example, and therefore select
No
from the
Reallocate IP
drop-down list.
Figure 1-7
Add a portal device
# Associate the portal device with the IP address group.
As shown in
Figure 1-8 , in the device list on the portal device configuration page, click the icon in the
Port Group Information Management
column of device
Switch
to enter the port group configuration
page.
Figure 1-8
Device list
On the port group configuration page, click
Add
to enter the page for adding a port group, as shown in
Figure 1-9 . Perform the following configurations:
z
Type the port group name.
z
Select the configured IP address group. Note that the IP address used by the user to access the
network must be within this IP address group.