HP 4500G PWR 24-Port, Руководство по настройке

Страница: 1124 / 1968

2-4
Form Description
service-dot1p 8021p-list
Specifies to match packets by 802.1p priority of
the service provider network. The
8021p-list
argument is a list of CoS values in the range of 0
to 7.
Even though you can provide up to eight
space-separated CoS values for this argument,
the Switch 4800G supports only one CoS value
in a rule. If you configure multiple CoS values in
a rule, the rule cannot be issued.
service-vlan-id vlan-id-list
Specifies to match the packets of the VLANs of the
operator’s network. The
vlan-id-list
argument is a list
of VLAN IDs, in the form of
vlan-id to vlan-id
or
multiple discontinuous VLAN IDs (separated by
space). You can specify up to eight VLAN IDs for this
argument at a time. VLAN ID is in the range of 1 to
4094.
In a class configured with the operator
and
, the logical
relationship between the service VLAN IDs specified
for the
service-vlan-id
keyword is
or
.
source-mac mac-address
Specifies to match the packets with a specified source
MAC address.
Suppose the logical relationship between classification rules is
and
. Note the following when using the
if-match
command to define matching rules.
z
If multiple matching rules with the
acl
or
acl ipv6
keyword specified are defined in a class, the
actual logical relationship between these rules is
or
when the policy is applied.
z
If multiple matching rules with the
customer-vlan-id
or
service-vlan-id
keyword specified are
defined in a class, the actual logical relationship between these rules is
or
.
Defining a Traffic Behavior
To define a traffic behavior, you must first create it and then configure QoS actions such as priority
marking and redirect in traffic behavior view.
Follow these steps to define a traffic behavior:
To do… Use the command… Remarks
Enter system view
system-view
—
Create a traffic behavior and
enter traffic behavior view
traffic behavior
behavior-name
Required
Configure other actions in the
traffic behavior
Refer to the subsequent sections depending on the purpose of the
traffic behavior: traffic policing, traffic filtering, traffic redirecting,
priority marking, traffic accounting and so on.